PRODUCT CODE : 835-MBC-HP
The MaxVac MV-835-MBC-HP is a three phase ultra-high suction vacuum for use in many different areas. Powered by a suction unit side channel type turbine unit with direct drive from motor to turbine it is completely maintenance free and can provide round the clock service.
The switches are IP55 rated and are located at the back of the vacuum. A thermal switch is fitted in case of overheating. A vacuum gauge is fitted to enable suction levels and helps to detect when the filter is blocked. A pressure relief valve ensures constant cooling of the motor.
The vacuum is fitted with M Class filters which are cleaned using reverse pulse compressed air system operated by an on-board compressor on the vacuum controlled by on-board timers. The filter cleaning system is very efficient using high pressure air to keep the filter cartridges clean.
The vacuum is fitted with a 220ltr bin or the Longopac bagging system allowing waste to be disposed of safely.
Model MV 835-MBC-HP
Voltage 400v 50/60hz
Vacuum Rate (max) 6000mm/H2O
Filter Type Antistatic cartridge
Filter Surface 120,000cm2
Air Flow 1120m3/h
Capacity Longopac / Bin
Suction Inlet Ø120mm
Noise Level 78dB(A)
Dimensions (cm) 92w x 180d x 220h